vacuum cleaner constructor is a good dust removal equipment, the performance is mainly in the production rate, small vacuum cleaner constructor can basically achieve a good rate in the use process, the basic effect is much better than artificial dust removal, in this process, There is certainly no secondary adsorption of dust, basically avoiding the related pollution brought about later. In order to prevent fog in this process and better paste the bag site, the small vacuum cleaner constructor makes good use of the reverse blowing effect of the relevant high temperature smoke in this process. Of course, such a tracking system can still grasp such flue gas conditions, and more in this product has a good filtration effect. All machines will have small failures in the process of use, so our small vacuum cleaner constructor is no exception, but do not worry when encountering a failure, to find the problem and solve in a short time, so that the normal operation of the machine can be stabilized.

vacuum cleaner constructor after installation precautions are as follows:

vacuum cleaner constructor voltage is three phase AC 380 volts, from the vacuum cleaner constructor external wire connected to the power supply can start to use, the initial rotation, should pay attention to whether the fan is turning (such as reverse, the air volume is very small, need to replace the power cable).

Second, vacuum cleaner constructor according to the actual needs, regularly clean the dust, dust in the dust collector, just when the fan and the clearance mechanism stop working, open the sealed ash door and draw out the drawer.

According to the nature of the dust and the size of the capacity, the vacuum cleaner constructor should be periodically vibrated to clean the ash, generally three to four times per shift to ensure the normal work of the dust collector.

In order to determine the best working condition of the dust removal equipment, it should be as close as possible to the source of dust, generally 1.5 meters to 2.0 meters, the connection pipe as short as possible, and minimize the elbow, so as not to increase the resistance loss.

5, vacuum cleaner constructor electric control box cover, can not be opened at will during work, if you need to adjust the cleaning time, or need to check the circuit, should be shut off after the power supply in the work.

Six, the vacuum cleaner cover is to determine the key accessories of the vacuum cleaner constructor unit in a better state, the use of units should be based on the size of the workpiece, the nature of the dust, in accordance with the principle of pass, close, smooth, seal, design dust cover, make the ideal vacuum cover.

vacuum cleaner constructor should check whether the inspection door, ash door, and air duct connection system are sealed before work, so as to avoid leakage and reduce the vacuum effect.

vacuum cleaner constructor https://www.kaisenfilter.com/KSG-5-5-A-High-Vacuum-Fume-Extractor.html