NSE7_EFW-7.2日本語対策、NSE7_EFW-7.2ファンデーション

FortinetのNSE7_EFW-7.2試験にもっと首尾よく合格したいのですか。そうしたら速くGoShikenを選びましょう。GoShikenは様々なIT認証試験を受ける人々に正確な試験資料を提供するサイトです。GoShikenはIT職員としてのあなたに昇進するチャンスを与えられます。GoShiken が提供したFortinetのNSE7_EFW-7.2試験に関する一部の無料の問題と解答を利用してみることができます。そうすると、我々の信頼性をテストできます。

FortinetのNSE7_EFW-7.2ソフトを使用するすべての人を有効にするために最も快適なレビュープロセスを得ることができ、我々は、FortinetのNSE7_EFW-7.2の資料を提供し、PDF、オンラインバージョン、およびソフトバージョンを含んでいます。あなたの愛用する版を利用して、あなたは簡単に最短時間を使用してFortinetのNSE7_EFW-7.2試験に合格することができ、あなたのIT機能を最も権威の国際的な認識を得ます！

NSE7_EFW-7.2日本語対策

NSE7_EFW-7.2ファンデーション NSE7_EFW-7.2日本語版と英語版

GoShikenは君の成功のために、最も質の良いFortinetのNSE7_EFW-7.2試験問題と解答を提供します。もし君はいささかな心配することがあるなら、あなたはうちの商品を購入する前に、GoShikenは無料でサンプルを提供することができます。あなたはGoShikenのFortinetのNSE7_EFW-7.2問題集を購入した後、私たちは一年間で無料更新サービスを提供することができます。

Fortinet NSE 7 - Enterprise Firewall 7.2 認定 NSE7_EFW-7.2 試験問題 (Q19-Q24):

質問 # 19
Refer to the exhibit.

which contains a partial configuration of the global system. What can you conclude from this output?

A. NPs and CPs arc disabled
B. Only NPs are disabled
C. NPs and CPs are enabled
D. Only CPs arc disabled

正解：A

解説：
The configuration output shows various global settings for a FortiGate device. The terms NP (Network Processor) and CP (Content Processor) relate to FortiGate's hardware acceleration features. However, the provided configuration output does not directly mention the status (enabled or disabled) of NPs and CPs.
Typically, the command to disable or enable hardware acceleration features would specifically mention NP or CP in the command syntax. Therefore, based on the output provided, we cannot conclusively determine the status of NPs and CPs, hence option D is the closest answer since the output does not confirm that they are enabled.
References:
* FortiOS Handbook - CLI Reference for FortiOS 5.2

質問 # 20
Exhibit.

Refer to the exhibit, which contains a partial policy configuration.
Which setting must you configure to allow SSH?

A. Select an application control profile corresponding to SSH in the Security Profiles section
B. Include SSH in the Application field
C. Configure pot 22 in the Protocol Options field.
D. Specify SSH in the Service field

正解：D

解説：
Option A is correct because to allow SSH, you need to specify SSH in the Service field of the policy configuration. This is because the Service field determines which types of traffic are allowed by the policy1. By default, the Service field is set to App Default, which means that the policy will use the default ports defined by the applications. However, SSH is not one of the default applications, so you need to specify it manually or create a custom service for it2.
Option B is incorrect because configuring port 22 in the Protocol Options field is not enough to allow SSH. The Protocol Options field allows you to customize the protocol inspection and anomaly protection settings for the policy3. However, this field does not override the Service field, which still needs to match the traffic type.
Option C is incorrect because including SSH in the Application field is not enough to allow SSH. The Application field allows you to filter the traffic based on the application signatures and categories4. However, this field does not override the Service field, which still needs to match the traffic type.
Option D is incorrect because selecting an application control profile corresponding to SSH in the Security Profiles section is not enough to allow SSH. The Security Profiles section allows you to apply various security features to the traffic, such as antivirus, web filtering, IPS, etc. However, this section does not override the Service field, which still needs to match the traffic type. Reference: =
1: Firewall policies
2: Services
3: Protocol options profiles
4: Application control

質問 # 21
Exhibit.

Refer to the exhibit, which contains a partial VPN configuration.
What can you conclude from this configuration1?

A. FortiGate creates separate virtual interfaces for each dial up client.
B. Dead peer detection s disabled.
C. The routing table shows a single IPSec virtual interface.
D. The VPN should use the dynamic routing protocol to exchange routing information Through the tunnels.

正解：B

解説：
The configuration line "set dpd on-idle" indicates that dead peer detection (DPD) is set to trigger only when the tunnel is idle, not actively disabled1. Reference: FortiGate IPSec VPN User Guide - Fortinet Document Library

質問 # 22
You contoured an address object on the tool fortiGate in a Security Fabric. This object is not synchronized with a downstream device. Which two reasons could be the cause? (Choose two)

A. The root FortiGate has configuration-sync set to enable
B. The address object on the tool FortiGate has fabric-object set to disable
C. The downstream FortiGate has configuration-sync set to local
D. The downstream TortiGate has fabric-object-unification set to local

正解：B、D

解説：
Option A is correct because the address object on the tool FortiGate will not be synchronized with the downstream devices if it has fabric-object set to disable. This option controls whether the address object is shared with other FortiGate devices in the Security Fabric or not1.
Option C is correct because the downstream FortiGate will not receive the address object from the tool FortiGate if it has fabric-object-unification set to local. This option controls whether the downstream FortiGate uses the address objects from the root FortiGate or its own local address objects2.
Option B is incorrect because the root FortiGate has configuration-sync set to enable by default, which means that it will synchronize the address objects with the downstream devices unless they are disabled by the fabric-object option3.
Option D is incorrect because the downstream FortiGate has configuration-sync set to local by default, which means that it will receive the address objects from the root FortiGate unless they are overridden by the fabric-object-unification option4. Reference: =
1: Group address objects synchronized from FortiManager5
2: Security Fabric address object unification6
3: Configuration synchronization7
4: Configuration synchronization7
5: Security Fabric - Fortinet Documentation

質問 # 23
Exhibit.

Refer to the exhibit, which shows an ADVPN network.
The client behind Spoke-1 generates traffic to the device located behind Spoke-2.
Which first message floes the hub send to Spoke-110 bring up the dynamic tunnel?

A. Shortcut reply
B. Shortcut forward
C. Shortcut query
D. Shortcut offer

正解：C

解説：
In an ADVPN scenario, when traffic is initiated from a client behind one spoke to another spoke, the hub sends a shortcut query to the initiating spoke. This query is used to determine if there is a more direct path for the traffic, which can then trigger the establishment of a dynamic tunnel between the spokes.

質問 # 24
......

目の前の本当の困難に挑戦するために、君のもっと質の良いFortinetのNSE7_EFW-7.2問題集を提供するために、私たちはGoShikenのITエリートチームの変動からFortinetのNSE7_EFW-7.2問題集の更新まで、完璧になるまでにずっと頑張ります。私たちはあなたが簡単にFortinetのNSE7_EFW-7.2認定試験に合格するができるという目標のために努力しています。あなたはうちのFortinetのNSE7_EFW-7.2問題集を購入する前に、一部分のフリーな試験問題と解答をダンロードして、試用してみることができます。

NSE7_EFW-7.2ファンデーション: https://www.goshiken.com/Fortinet/NSE7_EFW-7.2-mondaishu.html

お客様の特定の状況に応じたNSE7_EFW-7.2学習クイズ、当社Fortinetは、NSE7_EFW-7.2試験問題を編集するために、この分野で多くの主要な専門家を採用しています、Fortinet NSE7_EFW-7.2日本語対策両方の問題集のデモを無料で提供し、ご購入の前に問題集をよく理解することができます、NSE7_EFW-7.2試験問題のこのバージョンを使用すると、試験に簡単に合格することができます、GoShikenはNSE7_EFW-7.2試験資料の品質と信頼性を100％保証します、当社のNSE7_EFW-7.2ガイド急流が他の学習教材より高い合格率を持っていることは間違いありません、もしあなたも試験に合格したいのなら、GoShiken NSE7_EFW-7.2ファンデーションをミスしないでください。

まさか、本気でセックスの経験人数だと思ってます、日本のものと違い、華奢な線画で彩られた刺青である、お客様の特定の状況に応じたNSE7_EFW-7.2学習クイズ、当社Fortinetは、NSE7_EFW-7.2試験問題を編集するために、この分野で多くの主要な専門家を採用しています。

試験の準備方法-有難いNSE7_EFW-7.2日本語対策試験-便利なNSE7_EFW-7.2ファンデーション

両方の問題集のデモを無料で提供し、ご購入の前に問題集をよく理解することができます、NSE7_EFW-7.2試験問題のこのバージョンを使用すると、試験に簡単に合格することができます、GoShikenはNSE7_EFW-7.2試験資料の品質と信頼性を100％保証します。