AZ-104勉強時間 & AZ-104学習範囲

AZ-104準備資料で20〜30時間学習した直後に、今後の試験に自信を持つことができるという誇張はありません。数万人のお客様が弊社の試験資料の恩恵を受けて、簡単に試験に合格しました。データは、私たちのハイパス率が信じられないほど98％から100％であることを示しました。間違いなく、あなたの成功はAZ-104トレーニングガイドで100％保証されています。リンクをクリックするだけで概要を表示できるのが便利であり、あらゆる種類のAZ-104バージョンを体験できます。

Microsoft AZ-104認定試験は、Azureサービスの管理を担当するITプロフェッショナル、システム管理者、ネットワーク管理者、クラウド管理者に推奨されています。この認定試験は、クラウドコンピューティング業界でのキャリアアップの機会を探している人々にとっても有益です。

AZ-104勉強時間

AZ-104試験の準備方法｜効率的なAZ-104勉強時間試験｜認定するMicrosoft Azure Administrator学習範囲

人生には様々な選択があります。選択は必ずしも絶対な幸福をもたらさないかもしれませんが、あなたに変化のチャンスを与えます。GoShikenのMicrosoftのAZ-104「Microsoft Azure Administrator」試験トレーニング資料はIT職員としてのあなたがIT試験に受かる不可欠なトレーニング資料です。GoShikenのMicrosoftのAZ-104試験トレーニング資料はカバー率が高くて、更新のスピードも速くて、完全なトレーニング資料ですから、GoShiken を手に入れたら、全てのIT認証が恐くなくなります。

Microsoft AZ-104試験に合格することは、Microsoft認定を受けたAzure Administrator Associate認定を獲得するための前提条件です。この認定は業界で高く評価されており、より良い雇用機会とより高い給与につながる可能性があります。認定は2年間有効であり、候補者は再認証試験に合格したり、特定のコースセットを完了することで更新できます。

Microsoft AZ-104試験は、認定されたAzure管理者になりたい個人のスキルと知識をテストするように設計されています。この試験では、Azureのサブスクリプションとリソースを管理し、ストレージソリューションを実装および管理し、仮想マシンを展開および管理し、仮想ネットワークを構成および管理し、アイデンティティを管理する候補者の能力を評価します。この試験は、Azureポータル、Azure Powershell、およびAzure CLIを使用してこれらのタスクを実行する候補者の能力をテストするように設計されています。

Microsoft Azure Administrator 認定 AZ-104 試験問題 (Q147-Q152):

質問 # 147
You have the Azure management groups shown in the following table.

You add Azure subscriptions to the management groups as shown in the following table.

You create the Azure policies shown in the following table.

For each of the following statements, select Yes if the statement is true. Otherwise, select No.
NOTE: Each correct selection is worth one point.

正解：

解説：

Explanation:
Box 1: No
Virtual networks are not allowed at the root and is inherited. Deny overrides allowed.
Box 2: Yes
Virtual Machines can be created on a Management Group provided the user has the required RBAC permissions.
Box 3: Yes
Subscriptions can be moved between Management Groups provided the user has the required RBAC permissions.
Reference:
https://docs.microsoft.com/en-us/azure/governance/management-groups/overview
https://docs.microsoft.com/en-us/azure/governance/management-groups/manage#moving-management-groups-and-subscriptions

質問 # 148
You have an Azure Storage account named storage1.
You have Azure App Service apps named App1 and App2 that run in an Azure container instance. Each app uses a managed identity.
You need to ensure that App1 and App2 can read blobs from storage1. The solution must meet the following requirements:
* Minimize the number of secrets used.
* Ensure that App2 can only read from storage1 for the next 30 days.
What should you configure in storage1 for each app? To answer, select the appropriate options in the answer are a. NOTE: Each correct selection is worth one point

正解：

解説：

質問 # 149
You have the App Service plans shown in the following table.

You plan to create the Azure web apps shown in the following table.

You need to identify which App Service plans can be used for the web apps.
What should you identify? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

正解：

解説：

Explanation:
Box 1: ASP1 ASP3
Asp1, ASP3: ASP.NET Core apps can be hosted both on Windows or Linux.
Not ASP2: The region in which your app runs is the region of the App Service plan it's in.
Box 2: ASP1
ASP.NET apps can be hosted on Windows only.
Reference:
https://docs.microsoft.com/en-us/azure/app-service/quickstart-dotnetcore?pivots=platform-linux
https://docs.microsoft.com/en-us/azure/app-service/app-service-plan-manage#

質問 # 150
HOTSPOT
You need to meet the connection requirements for the New York office.
What should you do? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.
Hot Area:

正解：

解説：

Section: [none]
Explanation:
Box 1: Create a virtual network gateway and a local network gateway.
Azure VPN gateway. The VPN gateway service enables you to connect the VNet to the on-premises network through a VPN appliance. For more information, see Connect an on-premises network to a Microsoft Azure virtual network. The VPN gateway includes the following elements:
* Virtual network gateway. A resource that provides a virtual VPN appliance for the VNet. It is responsible for routing traffic from the on-premises network to the VNet.
* Local network gateway. An abstraction of the on-premises VPN appliance. Network traffic from the cloud application to the on-premises network is routed through this gateway.
* Connection. The connection has properties that specify the connection type (IPSec) and the key shared with the on-premises VPN appliance to encrypt traffic.
* Gateway subnet. The virtual network gateway is held in its own subnet, which is subject to various requirements, described in the Recommendations section below.
Box 2: Configure a site-to-site VPN connection
On premises create a site-to-site connection for the virtual network gateway and the local network gateway.

Scenario: Connect the New York office to VNet1 over the Internet by using an encrypted connection.
Incorrect Answers:
Azure ExpressRoute: Established between your network and Azure, through an ExpressRoute partner. This connection is private. Traffic does not go over the internet.
Reference:
https://docs.microsoft.com/en-us/azure/architecture/reference-architectures/hybrid-networking/vpn Testlet 3 Case study This is a case study. Case studies are not timed separately. You can use as much exam time as you would like to complete each case. However, there may be additional case studies and sections on this exam.
You must manage your time to ensure that you are able to complete all questions included on this exam in the time provided.
To answer the questions included in a case study, you will need to reference information that is provided in the case study. Case studies might contain exhibits and other resources that provide more information about the scenario that is described in the case study. Each question is independent of the other questions in this case study.
At the end of this case study, a review screen will appear. This screen allows you to review your answers and to make changes before you move to the next section of the exam. After you begin a new section, you cannot return to this section.
To start the case study
To display the first question in this case study, click the Next button. Use the buttons in the left pane to explore the content of the case study before you answer the questions. Clicking these buttons displays information such as business requirements, existing environment, and problem statements. If the case study has an All Information tab, note that the information displayed is identical to the information displayed on the subsequent tabs. When you are ready to answer a question, click the Question button to return to the question.
Overview
Contoso, Ltd. is a manufacturing company that has offices worldwide. Contoso works with partner organizations to bring products to market.
Contoso products are manufactured by using blueprint files that the company authors and maintains.
Existing Environment
Currently, Contoso uses multiple types of servers for business operations, including the following:
* File servers
* Domain controllers
* Microsoft SQL Server servers
Your network contains an Active Directory forest named contoso.com. All servers and client computers are joined to Active Directory.
You have a public-facing application named App1. App1 is comprised of the following three tiers:
* A SQL database
* A web front end
* A processing middle tier
Each tier is comprised of five virtual machines. Users access the web front end by using HTTPS only.
Requirements
Planned Changes
Contoso plans to implement the following changes to the infrastructure:
* Move all the tiers of App1 to Azure.
* Move the existing product blueprint files to Azure Blob storage.
* Create a hybrid directory to support an upcoming Microsoft Office 365 migration project.
Technical Requirements
Contoso must meet the following technical requirements:
* Move all the virtual machines for App1 to Azure.
* Minimize the number of open ports between the App1 tiers.
* Ensure that all the virtual machines for App1 are protected by backups.
* Copy the blueprint files to Azure over the Internet.
* Ensure that the blueprint files are stored in the archive storage tier.
* Ensure that partner access to the blueprint files is secured and temporary.
* Prevent user passwords or hashes of passwords from being stored in Azure.
* Use unmanaged standard storage for the hard disks of the virtual machines.
* Ensure that when users join devices to Azure Active Directory (Azure AD), the users use a mobile phone to verify their identity.
* Minimize administrative effort whenever possible.
User Requirements
Contoso identifies the following requirements for users:
* Ensure that only users who are part of a group named Pilot can join devices to Azure AD.
* Designate a new user named Admin1 as the service admin for the Azure subscription.
* Admin1 must receive email alerts regarding service outages.
* Ensure that a new user named User3 can create network objects for the Azure subscription.

質問 # 151
You have an Azure web app named webapp!
You have a virtual network named VNET1 and an Azure virtual machine named VMI that hosts a MySQL database. VM1 connects to VNET1, You need to ensure that webapp! can access the data hosted on VMI.
What should you do?

A. Deploy an intemal load balancer.
B. Deploy an Azure Application Gateway.
C. Peer VNET1 to another virtual network.
D. Connect webappt to VNET1.

正解：B

質問 # 152
......

AZ-104学習範囲: https://www.goshiken.com/Microsoft/AZ-104-mondaishu.html