HPE6-A85試験問題集、HPE6-A85関連復習問題集

HPE6-A85試験問題集、HPE6-A85関連復習問題集

さらに、GoShiken HPE6-A85ダンプの一部が現在無料で提供されています:https://drive.google.com/open?id=1P5oH0farcvMqmUR-7x-JcS8xMVXuAKK2

誰もが知っているように、最も重要な問題は学習者向けのHPE6-A85学習問題の質です。私たちは長年にわたってこの専門的なことを行ってきました。専門家に専門的な問題を処理させます。私たちに関しては、試験に合格するための最高のHPE6-A85試験問題を提供する自信があります。そして、最新のHPE6-A85テストガイドがあります。厳格な学習のみで、最新の専門的な学習資料を作成します。 HPE6-A85試験問題は受験者が試験に合格するのに最も適していると言えます。

Aruba Campus Access Associate Examは、Aruba Networking Solutionsのスキルと知識を強化したいネットワーク管理者、ワイヤレスエンジニア、および技術サポートの専門家に最適です。この認定は世界的に認識されており、競争の激しい雇用市場で候補者が際立っているのを助けることができます。

HPE6-A85試験問題集

HPE6-A85試験の準備方法|検証するHPE6-A85試験問題集試験|更新するAruba Campus Access Associate Exam関連復習問題集

IT認定試験を受ける受験生はほとんど仕事をしている人です。試験に受かるために大量の時間とトレーニング費用を費やした受験生がたくさんいます。ここで我々は良い学習資料のウェブサイトをお勧めします。GoShikenというサイトです。GoShikenの HPのHPE6-A85試験資料を利用したら、時間を節約することができるようになります。我々はあなたに向いて適当の資料を選びます。しかも、サイトでテストデータの一部は無料です。もっと重要のことは、リアルな模擬練習はあなたがHPのHPE6-A85試験に受かることに大きな助けになれます。GoShiken のHPのHPE6-A85試験資料はあなたに時間を節約させることができるだけではなく、あなたに首尾よく試験に合格させることもできますから、GoShikenを選ばない理由はないです。

HP Aruba Campus Access Associate Exam 認定 HPE6-A85 試験問題 (Q53-Q58):

質問 # 53
When performing live firmware upgrades on Aruba APs. which technology partitions all the APs based on RF neighborhood data minimizing the impact on clients?

  • A. Aruba AirMatch
  • B. Aruba ESP
  • C. Aruba ClientMatch
  • D. Aruba Ai insights

正解:A

解説:
Explanation
Aruba AirMatch is a feature that optimizes RF Radio Frequency. RF is any frequency within the electromagnetic spectrum associated with radio wave propagation. When an RF current is supplied to an antenna, an electromagnetic field is created that then is able to propagate through space. performance and user experience by using machine learning algorithms and historical data to dynamically adjust AP power levels, channel assignments, and channel width. AirMatch performs live firmware upgrades on Aruba APs by partitioning all the APs based on RFneighborhood data and minimizing the impact on clients. AirMatch uses a rolling upgrade process that upgrades one partition at a time while ensuring that adjacent partitions are not upgraded simultaneously. References:
https://www.arubanetworks.com/assets/ds/DS_AirMatch.pdfhttps://www.arubanetworks.com/techdocs/ArubaOS

 

質問 # 54
You put in a few show commands on switches EDGE1 and CORE1 to attempt to gather information to troubleshoot the issue Use the show command output images to determine the reason for the EDGE1 uplink being down

  • A. Spanning-Tree block state is preventing the Core uplink from having connectivity to the edge
  • B. The physical interfaces are not members of the correct LAG.
  • C. The Core is connected to the incorrect physical interlaces
  • D. LACP is not configured on the Core uplink

正解:D

解説:
Explanation
LACP is a protocol that allows multiple physical links to be aggregated into a single logical link for increased bandwidth and redundancy. LACP must be configured on both ends of the link for it to work properly. In this case, EDGE1 has LACP configured on its uplink port-channel 1, but CORE1 does not have LACP configured on its corresponding port-channel 1. This causes a mismatch and prevents the link from coming up.
References:https://www.arubanetworks.com/techdocs/ArubaOS_86_Web_Help/Content/arubaos-solutions/1-ove

 

質問 # 55
After having configured the edge switch uplink as requested your colleague says that they have failed to ping the core You ask your colleague to verify the connection is plugged in and the switch is powered on They confirm that both are correct You attempt to ping the core switch and confirm that the ping is failing.
Knowing the nature of this deployment, what commands might you use to troubleshoot this issued

  • A. diagnostic diag cable-diag 1/1/51 diag cable-diag 1/1/52 - to view diagnostic information for the physical link to get a status on any interruptions to Layer 1 connectivity, show ip route - to verify that the default gateway is present in the routing table show ip ospf - to check whether there is a layer 3 routing protocol enabled show ip dns - to view whether there is a valid dns source
  • B. Ping 10.1.1.1 - ping the core to attempt to verify connectivity show lacp agg - to verify which link aggregations are currently configured using which physical ports show lacp int - to verify the LACP status and whether any links are blocking in your topology show lldp neighors - to verify whether you are able to see the Core as an L2 neighbor to verify if the correct links are plugged in to the correct ports show run interface 1/1/51.1/1/52-to ensure the physical interfaces are no-shut and members of the lag show run interface lag 1 - to ensure the correct vlan trunking configuration is applied to the logical interface show run int vlan 20 - to ensure you have the L3 SVI no shut and configured in the correct subnet
  • C. Ping 10.11 1 - ping the core to attempt to verify connectivity Show trunk - to verify if the LAG interface was correctly added to the switch Show spanning tree - to check for spanning-tree blocked states Show port-access clients interface all - to view any port-access blocking states or failed authentication attempts on all interfaces Show run interface vlan20 - to double check the layer 3 svi configuration is correct for l_3 connectivity Show lldp neighors - to verify whether you are able to see the Core as an L2 neighbor to verify if the correct links are plugged in to the correct ports
  • D. Show run - to view the running configuration of the switch Show run | begin 20 "vlan 20" - to ensure VLAN 20 was correctly added to the database show run | begin 20 'interface vlan 20' - to view the L3 SVI configuration Show run interface 1/1/51.1/1/52 - to ensure the physical interfaces are no shut and were added as members of LAG 1 Show run int lag 1 - to verify LACP mode active was configured to eliminate LACP blocking states

正解:B

解説:
Explanation
These commands might help troubleshoot this issue as they check various aspects of the connectivity between the edge switch and the core switch, such as Layer 3 reachability, Layer 2 adjacency, LACP configuration and status, VLAN trunking configuration, and interface status.
References:https://www.arubanetworks.com/techdocs/AOS-CX_10_04/CLI/GUID-8F0E7E8B-0F4B-4A3C-AE7

 

質問 # 56
A customer has just implemented user and device certificates via a company-wide Group Based Policy (GPO) Which EAP method requires client certificates when authenticating to the network?

  • A. EAP-TTLS
  • B. EAP-TEAP
  • C. PEAP
  • D. EAP-TLS

正解:D

解説:
Explanation
EAP-TLS is an authentication method that requires client certificates when authenticating to the network. It provides mutual authentication between the client and the server using public key cryptography and digital certificates.
References:https://www.arubanetworks.com/techdocs/ClearPass/6.9/Guest/Content/CPPM_UserGuide/EAP-TLS

 

質問 # 57

Based on the given topology, what is the requirement on an Aruba switch to enable LLDP messages to be received by Switch 1 port 1/1/24. when Router 1 is enabled with LLDP?

  • A. int 1/1/24, lldp receive
  • B. LLDP is enabled by default
  • C. int 1/1/24, no cdp
  • D. global configuration lldp enable

正解:A

解説:
Explanation
LLDP Link Layer Discovery Protocol. LLDP is a vendor-neutral link layer protocol used by network devices for advertising their identity, capabilities, and neighbors on a local area network. is enabled by default on Aruba switches, but it can be disabled on a per-port basis using the no lldp command. To enable LLDP messages to be received by Switch 1 port 1/1/24, you need to enter the interface configuration mode for that port and use the lldp receive command.
References:https://www.arubanetworks.com/techdocs/ArubaOS_86_Web_Help/Content/arubaos-solutions/lldp/l

 

質問 # 58
......

資格試験の意味は、いくつかの点で、さまざまな専門分野での能力を示すHPE6-A85資格を取得する受験者の能力を証明することです。 HPE6-A85学習ガイド教材を選択すると、限られた学習時間でより多くの価値を創造し、より多くの知識を学び、受験できる試験を受けることができます。資格のあるHPE6-A85試験を通じて、これは私たちのHPE6-A85の実際の質問であり、すべてのユーザーの共通の目標であり、私たちは信頼できるヘルパーなので、このような良い機会をお見逃しなく。

HPE6-A85関連復習問題集: https://www.goshiken.com/HP/HPE6-A85-mondaishu.html

HPのHPE6-A85試験のための資料を探していますか、教材を使用すると、最短時間でHPE6-A85試験に合格できます、GoShiken HPE6-A85関連復習問題集は、あなたの最高の選択です、HPE6-A85ガイドの質問とHPE6-A85学習教材の更新を担当する専門スタッフの研究と制作を専門とするエキスパートチームを後押しします、私たちのHPE6-A85学習教材はユーザーに自信を与え、感情に強く依存します、HP HPE6-A85試験問題集 電話、iPadなどの他の電子製品にコピーすることもできます、これは、間違ったHPE6-A85質問を整理するプロセスの代替として使用できます 多くの人は、HPインターネットでHPE6-A85学習準備を購入するとプライバシーが明らかになることを心配することがよくあります、あなたはGoShikenが提供したHPE6-A85の認証試験の問題集を購入するの前にインターネットで無料な試用版をダウンロードしてください。

忘れるなよ、玖音 ん― 小さく頷いて、俺は毛布よりも温かい彼の温もりに包まれて深い眠りに落ちていった、時雨ぃ、前を見ぃ、HPのHPE6-A85試験のための資料を探していますか、教材を使用すると、最短時間でHPE6-A85試験に合格できます。

100%合格率のHPE6-A85試験問題集 合格スムーズHPE6-A85関連復習問題集 | 有難いHPE6-A85認証pdf資料 Aruba Campus Access Associate Exam

GoShikenは、あなたの最高の選択です、HPE6-A85ガイドの質問とHPE6-A85学習教材の更新を担当する専門スタッフの研究と制作を専門とするエキスパートチームを後押しします、私たちのHPE6-A85学習教材はユーザーに自信を与え、感情に強く依存します。

さらに、GoShiken HPE6-A85ダンプの一部が現在無料で提供されています:https://drive.google.com/open?id=1P5oH0farcvMqmUR-7x-JcS8xMVXuAKK2


yowove8733

5 Blog posts

Comments